Latest Forums Activity

+1 for Taste_is_Sweet. Very awesome!

+1 for heatherly84 ! Would definitely trade with her again!

+ starwarsgeek

Good looking headcasts, I have to do a quick write up on them
https://www.ebay.com/str/StarWarsGeek-C ... s-and-Toys

I have a loose one with his blaster and staff (why he didn't come with a sword I will never know) that I will be happy to sell for $50.00 Much better than eBay. I have a lot of loose Stargate and SGA figures I posted about yesterday, if you're interested.

Hi, Heartherly! Are you still looking for Ronon?

Hi! Yes, yes, I am!

Hmmm... I'm not overly familiar with him but going off what I can tell from a google search I would look at Naruto for the upper torso (it's a bit bulky on the torso, but the zipper, jacket bottom, and arms are pretty similar and you can thin out the sides and back pretty well) though I'd look for another figure for the legs (rock lee if you want to keep to the same line, but plain pants are pretty basic)

There are some other figures that could also work, such as Master Asia from G Gundam (I've seen a decent tracksuit Gohan done with it) there's a tracksuit Bruce Lee, and if they make a DBS 17 the upper torso might work ok... but I didn't like the bulk of most of them. I'd also look into school anime figures, since I feel the arms and pants would match ok from a typical male school unifor ...

Thank you! I think naruto would work very well. I have not seen naruto so I did not think to look for them. Master asia also might work. All your sugestions are very helpfull, thank you.

So the rough plan RN is that I have a 3d model with a hollowed out torso to use as the base, with magnets inside as space allows (discussions of a LED screen are being discussed, we'll see if that'll happen and how much room it'll take up). That's all gonna be a bit, but where I'm stuck right now is the joints.

While the attachment points will likely end with magnets on either end so I can swap them out, my plan was to have the joints be ball-hinge joints (similar to shoulder joints on an action figure) to allow for full range of motion. However, to match the look of the film with its oscillating energy between the sections, I'd LIKE to have those joints be clear so I can paint the energy lines by hand on top of them. The problem is that the Hobby Base joints that most closely resemble w ...

The easiest way would be to make the central part of the mech out of metal, so that the magnets can attach wherever you want. Perhaps a hollow metal ball as the base, with some modeling around it? Or maybe place strips of metal just underneath your sculpt.

Another way to go is to hide strong magnets underneath the sculpt at specific areas where you want the limbs to attach.

Thanks bro

2003 Razorjet Razor Jet 8.5" Flying Motorcycle Teenage Mutant Ninja Turtles. Basically a "foot Soldier" vechile.

Nice work

too kind bro !!!

Passion for the Craft shows! Not only a Cool Display in itself but for figures as well!

Thanks for the encouragement brother wolf !!!!!

Try applying a couple coats of neutral clear, between other color coats and as last coat. Might help, but try on scrap medium first to test it out, don't test anything on your figures till you know how it will come out.

Thanks, I might try that next time. I finished up the project though. I ended up just putting Mod Podge on everything and it worked out okay. I hope to upload soon! Thanks again to the fellows who commented some help.

I've always used the testors model masters aluminum and then used my clear over that. Side note, you may try a coat of gold instead of silver.

So to be clear, you'll be mailing a list of all the figures you'll be selling?

Yes, I will email with information regarding the sale with attachments showing storage unit, sample boxes, and sortable excel files of all items currently for sale.